Free Shipping
Over $300
Ships Free To Lower 48 States
3-Year WarrantyThe Miller Fume Extractor MWX-S 951178 from Welders Supply is your effective way to remove welding fumes from the air. Available with 7-foot (part #951510), 10-foot (Part #951511) or 12-foot (Part #951512), you can select the exact fume extractor configuration you need to most efficiently clear the air in your work place. Fume Extractors from Welders Supply are specifically designed for professional welding operations. Protection is not only effective, it is also longer lasting with nanofilter technology providing extended filter life. You’ll be able to work more efficiently because the air around you will be cleaner and more breathable. The Fume Extractor generates a powerful 875 CFM air volume. The internal tubing on the extraction arm is completely clear for maximum air flow.
The entire unit is easy to operate, simple to replace or clean the filters, and – importantly – easy to maintain so ongoing clean air is assured. The rugged metal base is very strong. You’ll be able to effectively use this equipment in even the toughest work environment. It’s an extremely effective fume extraction system. With its large fume holding capacity, the unit can run for much longer than competitive models before filters need to be cleaned or replaced. There’s an easy-to-read gauge to tell the operator when to replace the filter. The Miller Fume Extractor from Welders Supply is very easy to use. The hinged filter hatch is simple to open. Filter replacement requires no tools. This fume extraction system is perfect for fabrication shops, maintenance and repair operations. It is also excellent for manufacturing, production, schools and other education facilities.
| Filter Media | 490 ft.2 (45.52 m2) |
|---|---|
| AccuRated™ Airflow | 875 CFM (413 L/sec.) |
| Extraction Arm Diameter | 8 in. (203 mm) |
| Sound Level |
Approximately 70 dBA at 5 ft. (1.5 m) |
| Motor | 1 HP, 3450 RPM |
| Power | 115 V/1-Phase/60 Hz at approximately 11.9 A |
| Dimensions | H: 34.75 in (883 mm) W: 31.75 in (806 mm) D: 48 in (1219 mm) |
| Net Weight | MWX-D 238 lb. (108 kg) MWX-S 300 lb. (136 kg) |
| Shipping Weight | MWX-D 285 lb. (129 kg) MWX-S 340 lb. (154 kg) |
SHIPPING DIMENSIONS |
|
| Height: | 55.00 Inches |
| Width: | 61.00 Inches |
| Length: | 78.00 Inches |
| Weight: | 504 Lb(s) 0 Oz |
Clean or replace filter when Filter gauge reading is over 4 in. w.c. (10 x 100 Pa) or whenever air flow is too low to extract fumes.
Press and release Filter Cleaning switch. The filter cleaning system operates only when the unit is off.
The system cleans the filter in about 15 seconds. Wait until the cleaning has stopped before removing particles from tray. Pull out tray and remove particles from tray after every cleaning cycle.
Reinstall tray and pull lever up to secure tray in position. Inspect filter after cleaning (Section 7-4 of Owner's Manual). Start unit and check Filter gauge reading.
Documents
Videos
