ESAB Warrior 500i with Warrior 304, 5.5 ft - Ready to Weld Package #0558101760
ESAB WARRIOR 500I CC/CV , 304,GM-400,R-33 FM580 WELDER PACKAGE (460 VOLT 3-PHASE) ONLY ONE PACKAGE AVAILBALE AT THIS LOW PRICE!
This ready to weld package is capable of running more than one process at a given time. It is designed to allow for GMAW (MIG), FCAW (Flux-Cored), SMAW (Stick), and GTAW (TIG) welding as well as ACAG (Arc Gouging). All while delivering up to 500 amps for great short arc performance and all at only 60% of a duty cycle. With this product you will get welds of 0.030 to 5/64in thick wires; either solid or flux cored wires. The stick has a full tangle with this unit of excellent 7018 and 6018 performance, and the arc gouges with an electrode can cut up to a 3/8in diameter into solid metals. But this is all in thanks to the innovations that run through these machines technological feats.
The ability to work in any location or onsite is a must when it comes to welding, and with this unit that becomes a breeze with this entire machine being generator accessible. It allows for the use of all of its features such as:
-Inverter technologies that allow for increased mobility with the entire unit now smaller but actually increasing in its efficiency and allow more power to go to the lighter.
-Auto fan which reduces the amount of energy drawn through the unit by only initiating the fans to expel and release dirt or other debris that may tend to clog the unit.
-An automatic hot start/variable arc control that allows for the setting of the arc to be totally to the users wishes.
-Easy to use connection cables that house power, gas, and control cables for a quick connect and disconnect plug in/out (also being all together in a protective rubber sleeve helps prolong the cables longevity as well).
All which allows for this unit to be operated to the best of the user’s capability, but has been specifically designed to be easy to use.
Having the best tool on the market means little if you are not aware of how to properly use it, or if the design of it makes it not user friendly. That is not the case here. The entire machine down to the vary controls have been specifically made to allow a seamless productivity between it and the user. With; the interface is simple and clear to use, housing an all in one panel that hold all of the controls, and a read anywhere display allow for easy readout of the controls and setting you have entered in any environment and at any angel of view.
Ready to Weld package includes:
- Power source
- 5.5 ft. (1.7 m),16 ft. (5 m), or 32 ft. (9.7 m) cable connection set
- Warrior Feed 304 4-roll wire feeder
- .035/.045 in. (0.9/1.2 mm) V-groove drive rolls/guide tube
- Tweco Spray Master 450 MIG gun with .035-.045 in. (0.9-1.2 mm) accessories
- R-33-FM-580 gas regulator/flowmeter
- 49 ft. (15 m) work cable/ground clamp
- Input power cable is not included
|Adapter for 11 lbs. (5 kg) spool
|Adapter for spool diameter 17 in. (440 mm)
|Auto transformer, 208/230/460V, 3ph
|Counter balance device compl. 440 mm bobbin
|Female gas hose quick-connector
|Gas Meter (measures gas flow at the gun)
|Inlet guide for Marathon Pac (use with 899F50)
|Interconnection Cables - 70mm2, Gas-Cooled, 10.0m (32.8 ft)
|Interconnection Cables - 70mm2, Gas-Cooled, 15.0m (49.2 ft)
|Interconnection Cables - 70mm2, Gas-Cooled, 2.0m (6.5 ft)
|Interconnection Cables - 70mm2, Gas-Cooled, 25.0m (82 ft)
|MiniBoom counterbalance device (Requires P/N's 0460565880, 0461310880 and 0460946880)
|PrecisionMaster gas saver kit
|Remote outlet kit
|Spool cover, steel
|Strain relief for connection cables
|Strain relief for welding gun
|Warrior Feed 304
|Warrior Feed 304 for ST-21 & ST-16
|Warrior Feed 304 NAS2 (TWECO)
|Warrior Feed 304w, water-cooled
|Wheel kit for wire feeder
View all welding machines available online at Welders Supply