Ellis Drill Press 9400
Part Number:
9400
Ships Free To Lower 48 States
Ellis Drill Press 9400
Part Number:
9400
Ellis Drill Press 9400
Features:
- Variable speed from 0 to 1200 RPM
- Adjust speeds while operating in the material
- High torque at low RPM speeds
- Electronic reversing for tapping
- Tapping head is not needed
- Taps left or right handed threads
- Drill table rotates 360° around column
- Smooth operating table crank
- Fully enclosed spindle
- Quill lock and depth control
- Speed control
- Continuous speed adjustment while in operation
- Electronic reversing for tapping
- One turn on knob for adjusting speed (0 to 1200 RPM)
Please Note: The Chuck is not inlcuded.
Browse all power tools and welding equipment available online from Welders Supply.
| Ellis Drill Press 9400 Specifications | |
|---|---|
| MOTOR | 2HP A.C. Single Phase Choose 110V or 220V |
| CONTROL BOX | Infinitely variable speed by turning the dial Electronic reversing Full torque at low speeds All solid state circuitry Continuous speed adjustment while in operation |
| STANDARD | Power down feed |
| SPINDLE SPEEDS | 0 – 1200 RPM |
| DRILLS TO CENTER | 18-1/8″ |
| DRILLING CAPACITY | Steel 1-1/16″ Cast iron 1-1/4″ |
| TAPPING CAPACITY | 3/4″ |
| MORSE TAPER | No. 3 |
| QUILL DIAMETER | 3″ |
| COLUMN DIAMETER | 4″ |
| SPINDLE TRAVEL | 5-3/8″ |
| SPINDLE TO TABLE | (MAX.) 27-1/4″ |
| SPINDLE TO BASE | 46-1/4″ |
| SHIPPING WEIGHT | 675 lbs |
| TABLE Production type: | T- slotted 15-7/8″ X 17-7/8″ 2 Slots for 1/2″ t-bolts Ground working surface Coolant trough |
| BASE T- slotted | 16-3/8″ x 26-5/8″ 2 slots for 1/2″ t-bolts Ground working surface |
| SIZE | Height 69-1/2″ Width 20″ Depth 29″ |
SHIPPING DIMENSIONS |
|
| Height: | 30.00 Inches |
| Width: | 24.00 Inches |
| Length: | 70.00 Inches |
| Weight: | 675 Lb(s) 0 Oz |
Accessories
Consumables
Product Questions and Answers
Have a question about this product? Submit your question using the form below
People who bought this product were also interested in:
×
