Victor Thermal Dynamics Plasma Air Filter #7-7507
Plasma cutting requires clean, dry, oil-free compressed air. Here’s an economical way to ensure the compressed air running through your plasma cutter will not compromise the performance of your cutter. The Plasma Air Filter is a sub-micronic compressed air filter designed to remove the smallest contaminant, oil aerosol and condensed moisture. Allows for Installation of Filter inline with your air regulator on your plasma cutter. It will effectively remove contamination from the compressed air line to eliminate arc “sputter”, reduce corrosive wear of the electrode and tip, and restore maximum cutting efficiency to your plasma cutter. Customers who use this filter report contaminant-free air with higher flow rates and minimal drops in pressure. For maximum service life of your filter, we recommend blowing out your airline with an air gun at the start of the day to remove any condensation from the pipeline. Order your filter from Welders Supply and see the difference it makes in the performance of your plasma cutter.