Miller PAPR with Hard Hat & Titanium 9400i Helmet #261659

HEPA filter provides filtration of airborne particulate including solid dust particles, metal fumes and mists. Prefilter extends life of the main HEPA filter. Integrated spark guard protects filter assembly from large pieces of debris.
Filters provide protection from Hexavalent Chromium (Stainless Steel), Zinc Oxide (Galvanized Steel), Manganese, Aluminum, Nickel, Iron Oxide, Copper, Cadmium, Lead and Beryllium fumes.
Lightweight, low-profile blower allows for unrestricted movement and provides all-day comfort, reducing fatigue. Integrated shoulder straps provide a secure fit and equally distribute weight, alleviating lower back strain.
Dual air speeds allow users to adjust the volume of air to maximize comfort in varied work conditions. Audible and vibrating alarms notify users in noisy environments. Electronic control automatically adjusts fan speed to keep air flow constant. Quick-release belt for easy, one-handed don/doff.
Provides extended battery life with no memory retention from frequent charging: 4-6 hours on high speed, 6-8 hours on low speed, 500 charges, 3 hour charge time
Titanium Series welding helmets are designed to perform in the most intense industrial applications. The 9400i features 9 sq. in. viewing area with four independent arc sensors and integrated grind shield with 180 degree field of view. Other features include: digital lens controls, four operating modes (weld, grind, cut, x-mode), Infotrack™ arc tracking technology, aluminum heat shield to protect the lens in high-amperage applications and premium headgear.
Integrated hard hat with WeldX™ head seal and clear wideview lens. Note: integrated clear lens in hard hat head seal is not rated for grinding.
Other Versions of T94™ Series Welding Helmets
Title | PAPR with Hard Hat & Titanium 9400i Helmet |
---|---|
Assigned Protection Factor | 25 |
Filter | HEPA |
Hard Hat Certification | ANSI Z89.1 2009 Certified, Type 1, Class C or G |
NIOSH Certification | 42 CFR part 84 |
OSHA Classification | Loose-fitting Respirator |
Warranty | Miller's True Blue Warranty |
Other Versions of T94™ Series Welding Helmets
SHIPPING DIMENSIONS |
|
Height: | 11.00 Inches |
Width: | 13.50 Inches |
Length: | 22.50 Inches |
Weight: | 14 Lb(s) 2 Oz |
Proper installation is critical or there is the risk of contaminated air entering the helmet.
Tube can only be connected to helmets with a tab connector. Push rectangular end of breathing tube connector into helmet air inlet until it locks in position. The locking tab should be on outside of helmet air inlet.
Align pins on breathing tube connector (blower end) with channels in blower receptacle. Insert tube connector into blower receptacle until snug and then turn connector 1/8 turn clockwise.