Miller AccuLock™ MDX™ MIG Gun Liner for 0.023" - 0.030" Wire, 15' Length LM1A-15
For use with MDX MIG Guns.
Optimized Wire Feeding
Contact tip is aligned and centered with the liner lock when the diffuser is tightened creating a flawless wire feed path. Reduces burnbacks, birdnesting and erratic arc.
Replace and trim liners accurately every time - no measuring required! Liners are loaded and locked from the front of the gun, then locked and trimmed flush with the power pin cap at the back. Reduces wire feeding issues associated with improper liner trim lengths.
|Weight:||0 Lb(s) 8 Oz|