3M Adflo PAPR with 3M Speedglas Welding Helmet 9100-Air #35-1101-30iSW
*NEW* 3M Adflo PAPR with 3M Speedglas Welding Helmet 9100-Air, 35-1101-30iSW, HE Filter, Li Ion Batt, ADF 9100XXi, 1/C
The new auto-darkening filter kit for the 3M Speedglas Welding Helmet Series 9100 is your window to a new world of more realistic color and detail – to help you weld, grind and see your finish. With improvements based on input from master welders around the world, the 3M Speedglas Welding Filter 9100XXi sets a new standard for visibility, convenience and ease of use.
Improved optics deliver morenatural color and contrast, which may allow:
- Better control of the weld puddle with a view that appears lighter, brighter and more realistic
- Greater precision with set-up and finishing operations
- Simplified workflow with convenient, “gloves-on” memory mode switching – plus a clearer view of welding machine controls
Fast Switching Between Welding & Grinding
One touch of an external button lets you switch between welding mode and shade 3 grinding mode.
The 9100XXi ADF is compatible with all welding helmets in the 3MTM SpeedglasTM Welding Helmet Series 9100. However, to access the grinding and memory modes, the silver front panel included in the 3M Speedglas Auto-Darkening Filter Kit 9100XXi is required. This panel will only operate on Speedglas Welding Helmets 9100, 9100-Air and 9100-QR.
New Memory Modes
Push the external button for 2-3 seconds to access one of your two preset welding modes. Both memory modes have an individual setting for dark shade, light-to-dark switching sensitivity, and dark-to-light delay.
“Grab and Go” feature automatically turns the welding filter on to your last welding setting whenever you pick up the helmet. Automatically shuts down after a period of inactivity.
Check out our full selection of 3M products, Autodarkening welding helmets, and welding helmet accessories for sale online today.
All 3M Helmets are made to order and take 7-10 business days to be shipped out.
3M Adflo PAPR with 3M Speedglas Welding Helmet 9100-Air, HE Filter, Li-Ion Batt, ADF 9100XXi, 1/C Part #35-1101-30iSW Specs
|ADF Dark State Shades
|None, Variable 5, 8-13
|ADF Shade Range
|None, Variable 5, 8-13
|ADF Viewing Area (hxw)
|ADF Viewing Area (Metric)
|45x93 mm, 54x107 mm, 73X107 mm
|ADF 2000 hours
ADF 2500 hours
ADF 2800 hours
ADF: up to 1800 hours
PAPR: up to 12 hours
|Cartridge or Filter Included
|Shade 5, 8-13
|Eye & Face Protection
|Welding Helmet with Respiratory Assembly
|NIOSH Cartridge or Filter Assigned Color Coding
|5 Level (TIG>1A & MIG/MAG, Stick)
Product Questions and Answers
How to clean your mask:
- Detach parts.
Detach the battery pack, breathing tube and headgear from the motor/blower. Inspect all parts for damage.
- Replace damaged parts.
Replace all damaged parts prior to storage or next use.
- Clean Motor/Blower.
Clean the outer surfaces with a soft cloth dampened in a solution of water and mile, pH neutral detergent. DO NOT immerse or clean interior with air or vacuum.
- Clean breathing tube.
Clean the exterior and connection sites on the breathing tube with water and detergent solution. Ensure tube is completely dry before using or storing.
- Clean HE filter.
Open filter cover and inspect filter, pre-filter, and spark arrestor. Replace is excessively dirty, wet or damaged. HE and pre-filters cannot be cleaned. Clean spark arrestor with pH neutral detergent and damp rag.