Hypertherm Powermax 30 Retaining Cap #220483

Part Number: 220483
UPC: 00662310211103
$37.10 $44.25*
SAVE $7.15

Hypertherm Powermax 30 Retaining Cap #220483

The Hypertherm Powermax 30 Retaining Cap #220483 from Welder Supply is an extremely durable, long-lasting retaining cap exceeding industry requirements. Don’t jeopardize your Powermax 30 Plasma Cutter by using knock-off spares. A retaining cap for a plasma cutter keeps the swirl ring and nozzle in the proper position. It controls the flow of coolant to the outside of the nozzle.

The Hypertherm Powermax 30 Retaining Cap #220483 was created specifically for the Powermax 30. The nozzle’s front composite piece enables you to install the shield concentric onto the nozzle orifice. The nozzle then steers secondary gas to the shield. If the retaining cap doesn’t work, neither can you!

Because these parts are essential to a long, productive life for the Powermax 30, Welder Supply offers a complete range of plasma consumables:

  • Hypertherm electrodes
  • Hypertherm nozzles
  • Hypertherm shields
  • Hypertherm swirl rings
  • Hypertherm retaining caps

The Hypertherm Powermax 30 Retaining Cap #220483 is compatible with:

If you need it, we’ll provide it! One thing is for sure -- the Powermax 30 handheld torch will work longer, harder, more productively and more safely with the Hypertherm Powermax 30 Retaining Cap #220483 from Welder Supply.

Shop other Hypertherm productsPlasma Cutting MachinesAccessoriesWelding HelmetsHelmet AccessoriesGlovesJacketsApronsCaps, and Pants.

SHIPPING DIMENSIONS

Height: 2.00 Inches
Width: 4.00 Inches
Length: 4.00 Inches
Weight: 0 Lb(s) 1 Oz

Product Questions and Answers


Q - How often should the nozzle retainer be replaced? A - Standard cutting allows for longer usage of the nozzle retainer, but gouging can result in faster degradation of the retainer. The retainer should last several nozzle replacements, depending on the usage.
Q - How will I know it is time to replace the nozzle retainer? A - When the threads have become clogged with slag or dirt, or areas on the cap that are worn due to heat exposure.
Q - What does the nozzle retainer do? A - The nozzle retainer holds the swirl ring and nozzle in place to help direct the gas for the plasma cutter.

Have a question about this product? Submit your question using the form below

Related Products

Be the first to know about upcoming specials!