Miller ArcReach® SuitCase® 12, Bernard™ BTB 300 A Gun Pkg 951729
ArcReach® capabilities eliminate the time spent tracing weld cables hundreds of feet back to the power source because weld operators can make adjustments at the ArcReach wire feeder or remote.
- ArcReach® SuitCase® 12,
- .045 - 1/16 reversible dual VK drive rolls
- Bernard™ BTB Gun 300 AMP, 15FT
- CENTERFIRE contact tips, .045 (QTY 3), .052 (QTY 2)
Check out the wide selection of MIG, TIG, Stick and Gas welders available at Welders Supply Company.
- Flux Cored (FCAW)
- MIG (GMAW)
Miller ArcReach® SuitCase® 12 Specifications:
|Net Height||15.5 in|
|Net Length||21 in|
|Net Weight||35 lbs|
|Net Width||9 in|
Miller's True Blue Warranty
|Weight:||53 Lb(s) 0 Oz|
Product Questions and Answers
How to thread welding wire:
- Lay gun cable straight.
Lay gun cable out straight.
- Cut off wire end.
Open pressure assembly. Hold wire tightly and cut off end.
- Guide wire.
Guide wire between alignment pins, into drive roll grooves, and into gun liner.
- Tighten pressure adjustment.
Close pressure assembly and tighten pressure adjustment knob enough to feed wire. Press jog switch until wire comes out of gun.