Ships Free To Lower 48 States

Spool Gun (not included) WC-115A with Contactor #137546011

Diagram WC-115A with Contactor #137546011

Miller WC-115A with Contactor #137546011

Part Number: 137546011

UPC: 715959157117

$2,074.25 + Free Shipping $2,572.00*

SAVE $497.75

Features
Specs
Documents
Videos
Accessories
Consumables
FAQS

Miller WC-115A with Contactor #137546011

The Miller WC-115A with Contactor #137546011 control operates on 115 VAC and is designed primarily for CC DC power sources. It can also be used with CV power sources or DC engine drives supplying 115 VAC. When used with a CC source, the control circuit functions in a voltage-sensing mode. When used with a CV source, it functions as a constant-speed circuit. Works seamlessly with the Miller Spoolmatic® 15A & Spoolmatic® 30A for fast torch fed wire welding.

Features and Benefits:

Wire run-in control and drive motor acceleration control ensure optimum arc starting performance.
10-foot (3 m), wall-type plug power cord allows for greater dexterity in your welding environment.
Can also be used with CV power sources or DC engine drives
Miller's True Blue Warranty for 1 year

Shop for more welding equipment and accessories online.

GENERAL SPECIFICATIONS

Title	WC-115A with Contactor #137546011
Warranty	Miller's True Blue Warranty

SHIPPING DIMENSIONS
Height:	1200.00 Inches
Width:	16.00 Inches
Length:	24.00 Inches
Weight:	24 Lb(s) 0 Oz

Miller WC-115A Weld Control Operator's Manual

Miller WC-115A with Contactor Control#137546011 Equipment Miller WC-115A with Contactor Control#137546011 Demo with Spoolgun

Accessories

Consumables

Product Questions and Answers

How to Install Voltage Sensing Lead:

Locate Parts.
Locate the parts needed for the voltage sensing lead.
Connect Terminal.
Connect ring terminal on the end of the cord using the screw-in clamp. Crimp clamp tabs around the cord.
Attach Strain Relief.
Slide Strain Relief onto cord approximately 6 in from cord end.
Remove plug.
Remove upper hole plug from the rear panel.
Insert cord.
Insert the cord into the opening in the rear panel and secure strain relief into the opening.
Connect Lead.
Connect voltage sensing lead to terminal strip 1TK at lead 42.
Workpiece Connection.
For constant current welding(CC), place jumper plug in the EXT position and connect voltage sensing lead to the workpiece.