Miller® D-74 MPa Plus CV/DC Dual Wire Feeder 300578
Looking for the best wire feeder there is? The Miller D-74 MPa Dual Wire Feeder offers advanced features to match all of your needs. The quick-change drive rolls and drive-roll pressure adjustment arm make wire feeding a simpler process. Accu-Mate also makes feeding the best performance we can offer and stops approved MIG guns from sliding on the casing.
Our dual remote configuration offers the ability to work with both right-hand and left-hand drive motor assembly for push guns. The dual trigger schedule saves time by allowing the welder to switch parameters without adjustments. This wire feeder is efficient and useful.
- Push/Pull capability
- Wire-speed control and Tachometer feedback
- 24 VDC high-torque, permanent-magnet motor
- Solid-state speed control for efficient use and more durability
- 4 different weld programs that store your parameters
- Handles most wire diameters from 0.6 mm to 2.0 mm
Profile Pulse combines TIG’s looks with MIG’s efficiency. Spacing between the weld beads can be varied to provide the ripple pattern that you desire. This wire feeder continues to have all the abilities you desire.
1. MIG (GMAW)
2. Flux-cored (FCAW)
3. Pulsed MIG (GMAW)
Welders Supply carries all the best welding equipment and welding machines. Shop online now or view our full selection of wire feeders.For orders over $300, we offer free shipping!
|Model||Input Power||IP Rating||Wire Feed Speed||Wire Diameter Capacity||Dimensions||Net Weight|
|74 MPa||24 VAC, 10 A, 50/60 Hz||IP23||1.3-19.8 m/min. (50-780 ipm)||.6 - 2mm (.023-5/64") .9-1.6mm (.035-1/16")||
Single wire feeders: 58lb/26kg
Dual wire feeders: 87lb/39.5kg
|Weight:||86 Lb(s) 0 Oz|