Miller Syncrowave® 212 Water-Cooled TIG Welder with Coolmate™ 1S and Wireless Foot Control Package #951000254

This Syncrowave 212 package is a complete water-cooled TIG setup for welders who run long or high-amperage jobs on aluminum and stainless steel. It pairs the AC/DC Syncrowave 212 with a Coolmate 1S cooler, a Weldcraft W-250 water-cooled torch, coolant and a wireless foot control, and it runs on 120 V or 240 V power. The water-cooled torch stays cooler and lighter in your hand than an air-cooled torch at the same amperage. Auto-Set and the 4.3 in. color LCD make setup quick.

Highlights

• Complete Water-Cooled TIG Package: Includes the power source, Coolmate 1S cooler, four gallons of coolant, W-250 torch, regulator, gas hose, stick electrode holder, work clamp and both power cords.
• Coolmate™ 1S Cooler: Built for the Syncrowave 212, it plugs into the machine’s dedicated cooler receptacle. It has a 1 gal reservoir and up to 2,100 W of cooling capacity.
• Cooler-On-Demand™: The cooler runs only when it’s needed, which cuts noise, energy use and the dust pulled through the system.
• Weldcraft™ W-250 Water-Cooled Torch: Rated 250 A DC and 180 A AC at a 100% duty cycle, with around-the-head cooling and a flexible braided cable. A 10 ft cable cover is included.
• Wireless Foot Control: The wireless foot control (#301580) has a 90 ft operating range, with no pedal cable to route around the bench.
• Auto-Set™ and Pro-Set™: Auto-Set sets weld parameters from your material, thickness, joint and tungsten size. Pro-Set guides manual adjustments to balance, frequency, pulse and DIG.
• 120 V or 240 V Input: Detects the input voltage automatically. 120 V and 240 V power cords are included.
• Advanced AC and Pulse Controls: AC balance and frequency adjust oxide cleaning and arc focus on aluminum. DC pulse reduces heat input and distortion.
• High-Frequency Arc Starts: Non-contact HF starts keep tungsten and filler material free of contamination.
• Spool Gun Ready: Add the optional Spoolmate™ 150 spool gun to MIG weld aluminum with the same machine.

What’s Included

• Syncrowave® 212 power source
• Coolmate™ 1S cooler
• Coolant (4 one-gallon bottles, #043810)
• Wireless Foot Control System (#301580)
• 12.5 ft (3.8 m) Weldcraft™ W-250 TIG torch with 50 mm flow-thru Dinse-style connector (braided)
• 10 ft (3 m) TIG torch cable cover
• Weldcraft gas lens accessory kit (water)
• International-style TIG torch adapter (#20, water)
• Gas coupler (5/8 in-18 RH)
• 15 ft cable with electrode holder and Dinse-style connector
• 15 ft (4.6 m) work cable with clamp
• Flow gauge regulator for argon/mix (10 to 50 scfh, barbed bonnet)
• 5 ft (1.5 m) gas hose (single, reinforced PVC, 3/16 in)
• 6.5 ft (2 m) 120 V power cord and 6.5 ft (2 m) 240 V power cord
• Material thickness gauge

Not Included

• Cart
• Spoolmate™ 150 spool gun

Applications

• Aluminum and stainless steel fabrication
• Automotive repair and car restoration
• Racing, off-road and custom builds
• Décor and furniture
• Garage and shop projects
• Extended production TIG work

---

Rebate Redemption

GET MORE SAVINGS WHEN YOU ADD ON MILLER® ACCESSORIES* OR HOBART® FILLER METALS.

Buy $150 in qualifying products get a $50 rebate

Buy $300 in qualifying products get a $150 rebate

Buy $500 in qualifying products get a $200 rebate

How To Submit Your Build with Blue™ Rebate Request

1. Purchase a qualifying product.
2. Get an electronic copy of your invoice or receipt showing the purchase of at least one of the eligible products shown below.
   • Locate the serial number of each product.
   • For the Additional Products rebate, circle each additional item and price paid on your invoice or receipt.
3. Submit your rebate request.

30-Day Submission Deadline

Rebate claims must be submitted within 30 days of purchase date.

Submit or track rebate

Shop all Miller welding deals, Miller accessories and Hobart filler metals for maximum rebates at the lowest prices, from Welders Supply.

• Spec Sheet
• Manual

Product Questions and Answers

Have a question about this product? Submit your question using the form below