Hypertherm cartridge: SmartSYNC or adapter 105 A drag cutting - 428937

Part Number: 428937
UPC: 00662310495978
$57.00

Cut capacity:

1" and Higher Capacity

1" and Higher Capacity

Material type:

Mild Steel

Mild Steel

Stainless Steel

Stainless Steel

Hypertherm cartridge: SmartSYNC or adapter 105 A drag cutting #428937

Hypertherm's new SYNC cartridges are a great new addition to Hypertherm plasma cutters. The new consumables are an all-in-one system that can be easily screwed onto the torch, replacing the old 5 part consumable system. This cartridge is optimized to drag-cut metal up to 32mm (1-1/4") thick.

Features:

  • Easy-to-identify single-piece cartridge consumables are color-coded by the process to eliminate confusion and simplify consumable inventory management.
  • RFID-enabled SmartSYNC™ torches and cartridges automatically set the correct amperage and operating mode, eliminating setup errors.
  • End-of-life consumable detection eliminates the uncertainty of knowing when to change the cartridge.

Productivity Gains:

  • Simplified operation minimizes downtime, troubleshooting, waste, and training time.
  • Each cartridge has been designed to optimize the cutting or gouging process for the best possible performance.

Compatible SYNC Cutters: 

See all Hypertherm plasma cutting consumables and Powermax SYNC products from Welders Supply.

85 A drag cutting – hand cartridges are compatible with:

SmartSYNC™ torches for the Powermax 105 SYNC™ systems
Duramax® torches using a torch adapter for Powermax 105 systems

 

Cut Capacity

Metals up to 32 mm (1-1/2") thick

Product Questions and Answers


Q - What are SmartSYNC drag cut cartridges used for? A - 105A drag cut cartridges can be used with SmartSYNC torches drag cut metals up to 1 1/4" thick. Drag cutting involves dragging the tip along the work piece, making contact with the metal throughout the cut. Drag cutting is easier on the operator and produces less spatter.
Q - What torches are compatible with 105A drag cut consumable cartridges? A - Drag cut cartridges are compatible with all handheld SmartSYNC torches. Machine torches are compatible with gray mechanized consumables only.
Q - Which plasma cutters are compatible with 105A drag cut consumable cartridges? A - Hypertherm Powermax105 SYNC only.

Have a question about this product? Submit your question using the form below

Related Products

Be the first to know about upcoming specials!