THIS IS ONE PORTABLE PLASMA CUTTER WITH PUNCH!!! FREE SHIPPING TO THE LOWER 48 STATES! 30 Amps for 3/8 in. mild steel capacity, XT30 torch with ergonomic handle and flexible cable, Auto-Line™ and MVP™ Plugs make this 19 lb unit the most portable plasma cutting system in the market!
The rated cutting capacity is the rating that should meet or exceed your typical cutting thickness. This rating is based on traveling approximately 15 inches per minute to achieve a steady, precise cut.
Auto-Line™ and MVP™ (multi-voltage plug)
state-of-the-art flexibility to the end-user. The Auto-Line circuitry automatically connects to 120–240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. Miller’s multi-voltage plug (MVP™) allows connection to 120 or 240 V receptacles without tools—choose the plug that fits the receptacle and connect it to the power cord.
Protective X-CASE™
Miller's X-CASE provides excellent protection during transport and storage. Keep your equipment organized and have additional space for MVP Plugs, consumable boxes, gloves, eye protection, etc.
XT30 Torch
Ergonomic handle with unique no-slip grip, thumb guide and finger contours help prevent operator fatigue while the flexible cable makes maneuvering easy.
Auto-Refire™
Auto-Refire™ Technology provides ultimate operator convenience by automatically firing the pilot arc when cutting expanded metal or multiple pieces of metal. This allows the pilot arc to switch in and out as fast as the operator needs. No need for manual re-triggering which reduces user hand fatigue and time spent cutting.
Automatic Air Regulation
The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance.
Portability
At just 19 lbs, the shoulder strap allows the operator to easily carry from location to location.
Wind Tunnel Technology™ and Fan-On-Demand™
Wind Tunnel Technology - internal airflow that protects electrical components and PC boards from dirt, dust, debris…greatly improving reliability. Fan-On-Demand cooling system only operates when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit. See how it works.
After much research and talking with welding suppliers I decided on the Miller Spectrum 375. Very happy with the machine and it was easy to setup with clear instructions. I did test cuts on 1/4 inch and 1/8 inch steel, aluminum and painted sheet steel and was pleased with the fine results. I am a hobby welder and plan to use the plasma for projects and metal art work.
Product Questions and Answers
Q - Does the Miller Spectrum 375 X-TREME 12FT XT30 Torch need an air regulator?A - The Miller Spectrum 375 X-TREME 12FT XT30 Torch does not need an air regulator as it is self regulated.
Q - What size air source is needed to operate the Miller Spectrum 375 X-TREME 12FT XT30 Torch?A - The Miller Spectrum 375 X-TREME 12FT XT30 Torch requires an air compressor that is capable of providing 5 scfm of air at 90psi.
Q - Does the Miller Spectrum 375 X-TREME 12FT XT30 Torch come with a filter? Does it need an air filter to run?A - The Miller Spectrum 375 X-TREME 12FT XT30 Torch should be run with a filter, which is sold separately.
Q - Does the Miller Spectrum 375 X-TREME 12FT XT30 Torch have a pilot arc?A - Yes, the Miller Spectrum 375 X-TREME 12FT XT30 Torch has a pilot arc.
Have a question about this product? Submit your question using the form below
Miller Spectrum 375 X-TREME 12FT XT30 Torch w/ X-case — 642
or
Miller Multimatic 220 and Spectrum 375 X-TREME
Documents
Videos
Miller Multi-Voltage Plug
3/8 Cut
Single Phase
3-Year Miller Warranty
