Hypertherm cartridge: SmartSYNC or adapter 85 A drag cutting - 428935

Name: Drag cut Hypertherm SmartSYNC hand cartridge (85 A) #428935
Brand: Hypertherm
SKU: HYP428935

Part Number: 428935

UPC: 00662310495954

Hypertherm cartridge: SmartSYNC or adapter 85 A drag cutting - 428935

Part Number: 428935

UPC: 00662310495954

$58.00

Hypertherm cartridge: SmartSYNC or adapter 85 A drag cutting #428935

Hypertherm's new SYNC cartridges are a great new addition to Hypertherm plasma cutters. The new consumables are an all-in-one system that can be easily screwed onto the torch, replacing the old 5 part consumable system. This cartridge is optimized to drag-cut metal up to 25mm (1") thick.

Features:

Easy-to-identify single-piece cartridge consumables are color-coded by the process to eliminate confusion and simplify consumable inventory management.

RFID-enabled SmartSYNC™ torches and cartridges automatically set the correct amperage and operating mode, eliminating setup errors.

End-of-life consumable detection eliminates the uncertainty of knowing when to change the cartridge.

Productivity Gains:

Simplified operation minimizes downtime, troubleshooting, waste, and training time.

Each cartridge has been designed to optimize the cutting or gouging process for the best possible performance.

Compatible SYNC Cutters:

85 A drag cutting – hand cartridges are compatible with:
SmartSYNC™ torches for the Powermax85/105 SYNC™ systems
Duramax® torches using a torch adapter for Powermax85/105 systems

85 A drag cutting – hand cartridges are compatible with:

SmartSYNC™ torches for the Powermax85/105 SYNC™ systems

Duramax® torches using a torch adapter for Powermax85/105 systems

Cut Capacity
Metals up to 25 mm (1") thick

Cut Capacity

Metals up to 25 mm (1") thick

Product Questions and Answers

Q - What are SmartSYNC drag cut cartridges used for? A - 85A drag cut cartridges can be used with SmartSYNC torches drag cut metals up to 1" thick. Drag cutting involves dragging the tip along the work piece, making contact with the metal throughout the cut. Drag cutting is easier on the operator and produces less spatter.

Q - What torches are compatible with 85A drag cut consumable cartridges? A - Drag cut cartridges are compatible with all handheld SmartSYNC torches. Machine torches are compatible with gray mechanized consumables only.

Q - Which plasma cutters are compatible with 85A drag cut consumable cartridges? A - Hypertherm Powermax 85 and 105 SYNC machines.