HYPERTHERM POWERMAX125 - 180° MACHINE TORCH WITH CPC, SERIAL PORTS, I/O CABLES, AND 50' LEAD
Upgrade your cutting capabilities with the Hypertherm Powermax125 Plasma Cutter featuring a 180° Machine Torch, CPC, Serial Ports, I/O Cables, and a 50' Lead (600V) #059549. Boasting 125 amps of cutting power, this plasma cutter excels in various applications, effortlessly slicing through metals up to 57mm (2-1/4") thick at 125mm/min (5 ipm).
The 180° machine torch provides extended reach for mechanized cutting tasks, and the 50' lead offers increased flexibility in larger workspaces. Equipped with CPC, Serial Ports, and I/O Cables for enhanced connectivity, this plasma cutter seamlessly integrates into your cutting system.
Automated gas pressure adjustments and electrode end-of-life detection ensure consistent, high-quality cuts. The package includes the Powermax125 power supply, 180° machine torch with a 50' lead, CPC, Serial Ports, and I/O Cables. For detailed operating recommendations, consult the guides or reach out to Welders Supply Company at 1-800-236-8825.
POWERMAX125 ACCESSORIES:
COMPARE POWERMAX125 TO OTHER MODELS:
- Hypertherm Powermax30 XP
- Hypertherm Powermax45 XP
- Hypertherm Powermax65 SYNC
- Hypertherm Powermax85 SYNC
- Hypertherm Powermax105 SYNC
Explore our complete range of Hypertherm products or discover plasma cutter consumable parts and machines at Welders Supply. Elevate your cutting experience today!
Browse all Hypertherm products or see our selection of plasma cutter consumable parts and plasma cutting machines available at Welders Supply.
Hypertherm Powermax 125 Specifications | |
---|---|
Input voltages | 480/600 V, 3-PH, 50/60 Hz |
Input current @ 21.9 kW | 480/600 V, 31/24 A |
Output current | 30-125 A |
Rated output voltage | 175 VDC |
Duty cycle @ 104° F (40° C) | 100% @ 125 A, 480/600 V, 3-PH |
Open circuit voltage (OCV) | 320 VDC |
Dimensions with handles | 23.3" D; 10.8" W; 20.0" H |
Weight w/ 25' torch |
400 V - 105.7 lbs 600 V - 104.7 lbs |
Gas supply | Clean, dry, oil-free air or nitrogen |
Recommended gas inlet flow rate/pressure |
Cutting: 260 l/min (550 scfh) @ 5.9 bar (85 psi) Gouging: 212 l/min (450 scfh) @ 4.1 (60 psi) |
Input power cable length | 10' |
Power supply type | Inverter - IGBT |
Engine drive requirement | 40 kW for full 125 A output |
Certifications | CSA-certified for use in the Americas and Asia, except China |
Warranty | Power supplies have a 3-year warranty and torches a 1-year warranty |
Capacity |
Thickness |
Cut Speed |
---|---|---|
Cutting | ||
Recommended | 1½" | 18 ipm |
1 ¾” | 10 ipm | |
Severance (hand cutting) |
2 ¼” | 5 ipm |
Pierce* | 1" | |
*Pierce rating for handheld use or with automatic torch height control |
Capacity |
Metal removal rate |
Groove profile* |
---|---|---|
Gouging | ||
Typical gouge | 27.6 lbs/hr | 0.17-0.31" D x 0.24-0.390" W |
*Actual groove profile varies with torch angle, arc stretch, and technique |
SHIPPING DIMENSIONS |
|
Height: | 1.00 Inches |
Width: | 1.00 Inches |
Length: | 1.00 Inches |
Weight: | 1 Lb(s) 0 Oz |
- Hypertherm Powermax 125 059536 Operator Manual
- Hypertherm Powermax 125 059536 Service Manual
- Hypertherm Powermax 125 Plasma Cutter 059536 Product Brochure
- Cut Charts for Hypertherm Powermax125 Plasma Cutter for mild steel, stainless steel & aluminum.
- Additional Error Codes and Faults for Hypertherm Powermax 125