The manufacturing solution for welders of all skill levels, now offering pulse capabilities in an integrated package.
What's Included:
Deltaweld 500 With ArcConnect™ and 14 Pin
Features:
Easy to Use
EZ-Set simplifies parameter setup based on material thickness, removing complexity and reducing welder training time.
Legacy Meets Pulse
Pulsed MIG-capable Deltaweld with Intellx Pro feeder provides a 28-percent wider operating window and a more forgiving arc, compensating for variations in operator technique. Welders of any skill level can get into production quicker. Make your move.
ArcConnect™
Next generation communication to improve weld performance and allow point-of-use controls to be located at the feeder.
Fan-On-Demand™
Operates only when needed reducing noise, power consumption, and the amount of airborne contaminants going through the machine.
Dedicated Wire feeder options
Intellx feeder — New arc control feature means welders can produce better welds with minimal parameter adjustments.
Intellx Pro feeder — Adds Accu-Pulse®, EZ-Set, steel weld programs, and memory buttons.
Gouge Mode
Deltaweld 500 has a dedicated constant current carbon arc gouge mode specifically designed to gouge up to 3/8" carbons.
Backwards Compatibility
A model is available with both ArcConnect and the standard Miller 14 Pin for use with older Miller wirefeeders.
Wind Tunnel Technology
Internal air flow that protects electrical components and PC boards from dirt, dust, debris— greatly improving reliability.
Ready to Weld
The Deltaweld System is shipped as a complete package with everything you need to get welding sooner. Just hook up your primary power, add gas, wire and a welding gun, and you're ready to weld.
Welders Supply Demo: Deltaweld MIG Welders
Check out the wide selection of MIG, TIG, Stick, and Gas welders for sale at Welders Supply.
Processes
MIG (GMAW-P)
Flux-Cored (FCAW)
Accu-Pulse MIG (GMAW-P)
Air Carbon Arc (CAC-A)
Miller Detatweld 500 Specifications:
Industries Interests
Manufacturing Heavy Equipment Manufacturing Railcar Commercial Truck and Trailer
This machine was purchased to replace an old Deltaweld 451 in a large manufacturing shop. We were able to demo this unit first before the purchase was made and the demo machine was set up as a portable unit with the new Intellx Pro feeder head all on the Miller running gear. Our guys were super impressed with how stable the arc was and loved the built in gouge feature. Once we got our machine all installed and in place with the feeder mounted on a swing boom with 35 foot cables connecting it all together we had some difficulties. The machine was not performing the way the demo unit did. We had tried to just reuse the 2.0 cables that were running the old machine but were having trouble with too much spatter and unstable arc. After replacing the ground clamp and the cable with new 4.0 as well as the positive cable to a 4.0 it performs to what it should now. So the con to this machine is how sensitive it is to everything but on the flip side of that is how the machine can be dialed in to make perfect welds.
Product Questions and Answers
Have a question about this product? Submit your question using the form below
Documents
Videos
3-Year Power Warranty
MIG Welding
3 Phase
