Miller Dimension™ 650 380/460 V MIGRunner™ Package 951637
- .035 - .045 reversible dual V drive rolls
- 15ft 4/0 work cable with 600A C-Clamp
- 3ft gas hose
- 6ft 4/0 wire feeder to power source weld cable
- Bernard™ BTB Gun 400 AMP, 15FT
- Centerfire contact tips, .035 (QTY 3), .045 (QTY 2)
- Dimension 650 380/460 V
- MIGRunner Cart
- S-74 MPa Plus
Rugged and Durable Inside and Out - All aluminum construction helps the machine resist corrosion for long life.Exclusive protection input inductor protects machines performance and reliability from “dirty” input power.Wind Tunnel Technology™. Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
Smaller and lighter - Reduced size and weight results in an easier-to-handle package that exceeds the welding performance of larger, heavier machines. The Dimension 650 uses 40 percent less floor space than previous model.
Power efficient - High electrical efficiency and excellent power factor mean that you can get more welding done using less power.On 460 VAC, the new Dimension 650 draws only 43 amps at rated load and can operate on a 50-amp service. Four new machines can work at maximum loads simultaneously on a 200-amp service, drawing less amperage than three previous models.
Improved Arc Performance - High-quality performance from power-intensive to precise. Gouging mode provides 800 amps of usable power, a full 650 amps of power at 100-percent duty cycle. Perfect for heavy gouging with 3/8-inch carbons. Three wire modes (GMAW/FCAW/SAW) for simplified setup and optimized arc performance. Solid and flux-cored wires with gas offer exceptional short-arc MIG precision to weld thin metals with less risk of distortion or burn-through, and premium Flux-Cored welding with gas. Flux-Cored (self-shielded) welding performance is exceptional, especially with wires commonly found in infrastructure construction. Sub Arc mode provides capability to retrofit into nondigital Sub Arc applications. Excellent Stick and Lift Arc TIG performance. Arc control is beneficial when welding with Stick and solid wires for easier fine-tuning of tough-to-weld materials and out-of-position applications.
View our selection of multi-process Miller welders, welding machines, welding safety equipment, and plasma cutting machines.
|Title||Miller Dimension™ 650 380/460 V MIGRunner™ Package 951637|
Heavey Equipment Manufacturing
Boat / Yacht
High Purity Processing
|Input Voltage||380/400/440 V
|Input Hz||50 / 60 Hz|
|Rated Output||10 - 38 V, 5 - 425 A|
|Max Open Circuit Voltage||87 VDC|
|Portability||Lift Eye (Standard)
Running Gear / Cart (Optional)
Miller's True Blue Warranty