Hobart IronMan 230 MIG Welder #500536
If you need a MIG welder able to do nearly anything, you need the Hobart IronMan 203 MIG Welder. It outperforms the competition in arc quality, voltage control, duty cycle and value. Housed in a heavy-duty cabinet, this MIG welding marvel delivers 30 to 250 amps of pure power and flawless welds. Spatter and post-weld cleanup is almost non-existent. Want to weld aluminum? It's super easy with the IronMan 230 Welder. Just add the optional Hobart DP-3545-20 spool gun and you're ready to weld. This spool gun comes with a 20 foot cable and will weld aluminum from 18 gauge to 1/2".
Hobart IronMan 230 MIG Welder Applications:
- Auto Body
For the lowest prices on MIG, TIG, Stick and Gas welders, shop Welders Supply online.
Hobart Iron Man 230 Wire Feed Welder Part #500536
Hobart IronMan 230 MIG Welder Comes complete with:
- 15 ft. (4.6 m), 200 amp MIG gun
- 5 ft. (1.5 m) gas hose with fitting
- 10 ft. (3 m) primary input cable with plug
- 10 ft. (3 m) work cable with clamp
- .030/.035 in. dual groove drive roll
- Extra contact tips
- Built-in running gear/cylinder rack
Hobart IronMan 230 MIG Welder Power:
- 1 Phase
Hobart IronMan 230 MIG Welder Processes:
- MIG (GMAW)
- Flux Cored (FCAW)
Hobart IronMan 230 MIG Welder Material Thickness:
- Welds 24 gauge up to 1/2 inch
Hobart IronMan 230 MIG Welder Skill Level:
Product Questions and Answers
How to Install Wire Spool ad Adjust Hub Tension:
- Prepare Parts.
Collect Parts: Keyed Washer, Wire Spool, Keyed Washer, Compression Spring, Washer, Nut.
- Assemble Parts.
Assemble Parts in the order listed above.
- Adjust Tension.
Tighten or loosen hub tension until it reaches the desired level. Overtightening may cause slippage.