Miller Trailblazer® 325 (Kohler) EFI w/ Excel Power #907754001
Trailblazer® welder/generators deliver unbeatable arc performance providing the smoothest, most stable arc in the industry. The Trailblazer exclusive Auto-Speed™ technology delivers superior runtimes, increased fuel efficiency, and improved welder/generator performance. No other compact machine in the 300-amp class delivers more welding power or more auxiliary power with better fuel efficiency and less noise — for productive, profitable, quieter job sites.
Unbeatable arc performance
Wide amperage output with better welding deposition rates means you can get jobs done faster, saving time and money. The Trailblazer also has precise arc control, which allows you to fine-tune the arc to match your personal preferences and quickly dial in the perfect parameters to optimize weld quality and maximize productivity across a variety of applications and welding processes.
Matches engine speed to load — a Miller exclusive. Get the welding power you need — plus reduced fuel consumption and lower noise levels for a more-profitable, safer job sites. Unlike competitive machines that operate at 3,600 rpm (max) under any load, Miller-exclusive Auto-Speed technology responds to weld requirements by automatically adjusting engine speed to one of four rpm levels so the engine never works harder than necessary. Refueling time and operating costs are reduced, which means more productivity and profitability. Plus everyone on the job site gets a better working environment because noise levels and exhaust emissions are lowered.
Electronic fuel injection (EFI) (option)
Improve fuel efficiency for maximum productivity and profitability. Adding EFI to your Trailblazer welder/generator adds multiple benefits. With EFI, you’ll get faster, more-reliable starts in any weather — no choke adjustments needed. EFI-equipped Trailblazer machines are also up to 42 percent more fuel-efficient than standard carbureted models, improving profitability. Plus, refueling less frequently means you’ll spend more of your time welding, improving productivity.
Excel™ power (option)
Power at idle — a Miller exclusive. Unlike competitive machines that provide auxiliary power only at 3,600 rpm (max), Excel power delivers a full 2,400 watts (20 A) of 120-volt inverter-based, pure sine wave power at all speeds, including idle. With Excel power, you can operate job-site tools like grinders at quiet, fuel-saving speeds. Refueling time and operating costs are reduced with Excel power, which means more productivity and profitability. Plus everyone on the jobsite gets a better working environment because noise levels and exhaust emissions are lowered. Excel power — available only from Miller.
Cleaner and Stronger Generator Power
Combined with a 25-horsepower engine, Trailblazer welder/generators offer up to 12,000 watts of clean, truly usable generator power that is Accu-Rated™, not inflated: tested to deliver uninterrupted peak output for a minimum of 30 seconds for big loads, so you can get more jobs done. An independent welder and generator power system ensures no interaction between job-site tools and the welding arc, while advanced generator technology virtually eliminates power spikes and other electrical imperfections — so welds are cleaner and job-site tools can run without interruption, maximizing quality, productivity and profit.
Fewer refueling trips
No other gas welder/generator in the 300-amp class lets your crews spend more time working and less time refueling — because only Trailblazer welder/generators provide Auto-Speed™ technology, plus Excel™ power and electronic fuel injection (EFI) options, to deliver maximum runtime.
Maximum cost savings
Less money spent on fuel means more profit for you. Every Miller Trailblazer welder/generator has fuel-saving Auto-Speed technology; add optional Excel power and Electronic Fuel Injection (EFI) to save even more on fuel costs and enjoy a combination of advanced, profit-enhancing features that are only available on a Trailblazer welder/generator.
Safer, more productive jobsites
Quieter jobsites are safer and more productive because work crews can communicate easier, and work can start earlier and end later — even in noise-sensitive areas. If your jobsite needs a welder/generator, it needs a Trailblazer welder/generator — because no other gas-fueled choice is as quiet.
More portable, uses less truck and jobsite space
Trailblazer welder/generators are up to 17 percent smaller and 10 percent lighter then competitive machines — which means moving them is faster and easier, for maximum productivity. And because they take up less space, Trailblazer welder/generators let work trucks carry more equipment and gear — so your work crews can be ready for anything.
See our line of quality welding equipment and welding machine accessories or view our full selection of quality welding machines
- Air Carbon Arc Cutting and Gouging (CAC-A)
- Flux Cored (FCAW)
- MIG (GMAW)
- Stick (SMAW)
- TIG (GTAW)
|Title||Trailblazer® 325 (Kohler) EFI|
Farm and Ranch
Maintenance and Repair - Field Operations
Pipe Fabrication / Construction
Work / Service Trucks
|Engine Idle Speed||2400 RPM|
|Engine Weld Speed||2400 RPM
|Fuel Tank Size||12 gal.|
|Rated Output||325 A at 28 V, 100% Duty Cycle|
|Single Phase Generator Continuous Power||10500 W|
|Single Phase Generator Peak Power||12000 W|
|Sound Rating||Idle: 65 dB / Max Weld: 73.5 dB|
|Carbon Diameter||3/16 in (4.8 mm)|
|Amperage Range||10 - 325|
|Net Width||20 in|
|Net Height||28 in|
|Net Length||40.5 in|
|Net Weight||475 lbs|
Miller's True Blue Warranty
|Portability||Lift Eye (Standard)
Running Gear / Cart (Optional)
|Weld Output||CC / CV|
|Weight:||515 Lb(s) 0 Oz|