Hypertherm Cartridge: SmartSYNC or adapter 65 A drag cutting #428931
Hypertherm's new SYNC cartridges are a great new addition to Hypertherm plasma cutters. The new consumables are an all-in-one system that can be easily screwed onto the torch, replacing the old 5 part consumable system. This cartridge is optimized for drag-cutting metal up to 20mm (3/4") thick.
- Easy-to-identify single-piece cartridge consumables are color-coded by the process to eliminate confusion and simplify consumable inventory management.
- RFID-enabled SmartSYNC™ torches and cartridges automatically set the correct amperage and operating mode, eliminating setup errors.
- End-of-life consumable detection eliminates the uncertainty of knowing when to change the cartridge.
- Simplified operation minimizes downtime, troubleshooting, waste, and training time.
- Each cartridge has been designed to optimize the cutting or gouging process for the best possible performance.
Compatible SYNC Cutters:
See all Hypertherm plasma cutting consumables and Powermax SYNC products from Welders Supply.
65 A drag cutting – hand cartridges are compatible with:
|SmartSYNC™ torches for the Powermax65/85/105 SYNC™ systems|
|Duramax® torches using a torch adapter for Powermax65/85/105 systems|
Metals up to 20 mm (3/4") thick.