Miller Bobcat 250 #907502 FREE helmet FREE gloves FREE

Multi-Process
Engine Driven
Financing Available

Miller Bobcat 250 Gas Welder with EFI AC/DC Engine Drive Welder #907502

Miller Bobcat 250 EFI Gas Wlder

The Miller Bobcat 250 gas welder with EFI AC/DC Engine Drive Welder (Kohler) With EFI features Electronic Fuel Injection. Similar to the technology found in cars, EFI optimizes the air/fuel ratio for better performance and greater efficiency. Starts in all climates with no choke required. At 27% better fuel economy, it reduces operational costs and lowers emissions.

The front panel features an intuitive display with convenient maintenance notifications. This welder/generator is ideal for maximum generator loads like plasma cutting, especially with a whopping Accu-Rated 11,000 watts of usable peak power.

The Miller Bobcat 250 gas welder with EFI was designed lighter and smaller to save space and convenience. With a smaller, lighter design you can fit more things in your truck or trailer. The Miller Bobcat 250 is ideal for Stick and Flux-Cored welding and maintenance repair jobs. Perfect for working on the farm, ranch, or construction jobs. The welding generator combo is designed for long run times, reliability, and maximum performance.

Miller Bobcat 250 Gas Welder with EFI AC/DC Engine Drive Welder (Kohler) Processes:

MIG (GMAW)
Stick (SMAW)
Flux Cored (FCAW)
DC TIG (DC GTAW)
Air Plasma Cutting and Gouging (PAC) with Optional Spectrum Models

Miller Spoolmatic 30A Part#130831 with a 30 ft cable assembly

Miller Bobcat Gas Welder For Sale

Miller Bobcat 250 EFI Applications:

Construction
Farm and Ranch
Field and Maintenance Repair

See our line of quality welding equipment or view our full selection of quality welding machines. Check out our selection of safety equipment.

Other Miller Bobcat 250 Options:

Miller Bobcat 250 EFI Specifications:
Rated Output	CC/AC Stick/TIG: 225 Amps at 25 Volts CC/DC Stick/TIG: 250 Amps at 25 Volts CV/DC MIG/FCAW: 200 Amps at 20 Volts
Welding Amperage Range	CC/AC Stick/TIG: 40 - 250 Amps CC/DC Stick/TIG: 40- 250 Amps CV/DC MIG/FCAW: 17-28 Volts
Net Weight	501 lb (227 kg)
Generator Power 104DegF	Accu-Rated Power 11,000 Watts Peak, 9,500 Watts Continuous EFI Models 12,000 Watts Peak, 10,500 Watts Continuous
Engine	Gas Kohler CH 23, 23 HP at 3,600 RPM - 3 year warranty Subaru EH 65, 23 HP at 3,600 RPM - 5 year warranty Note: Engines warranted separately by engine manufacturer
Fuel RunTime Capacity	Fuel Capacity Gasoline 12 gal (45L) Run Time Welding with an 1/8 inch Stick electrode, 20% Duty Cycle, expect about 20 hours of operation. Under a continuous 4,000 watt generator load, expect approximately 14 hours of run time.

See all engine driven welding machines

SHIPPING DIMENSIONS
Height:	20.00 Inches
Width:	33.00 Inches
Length:	41.00 Inches
Weight:	501 Lb(s) 0 Oz

Miller Bobcat 250/EFI #907502 Spec Sheet (English)

Accessories

Consumables

Bobcat™ / Trailblazer® / Big Blue® Full KVA A...

$154.86

View

EFI Only Tune Up Kit for Miller Bobcat or Trailblazer Welding Machines

Bobcat™ / Trailblazer® Engine Tune-Up Kits (E...

$115.42

View

Bobcat™ / Trailblazer® Spark Arrestor #300924

$161.44

View

Protective Cover #300919

$303.68

View

Spoolmate 3035 Spool Gun (20 ft) #195016

$1,563.00

View

WC-115A with Contactor #137546011

$2,074.25

View

Highway Mid Frame Trailer #301438

$4,578.39

View

Miller Spectrum 375 X-Treme 907529 Build with Blue Holiday Promo

Spectrum 375 X-Treme Plasma Cutter w/ 12' Han...

$1,925.00

View

WC-115A Weld Control without Contactor #13754...

$1,562.84

View

Product Questions and Answers

Q - Where is this made? A - Made in USA!

Q - How much more efficient is the EFI version of the 250? A - Miller's testing showed it to have 27% better fuel economy, but there's also the benefit of fast and easy starts in all types of climates .

Q - How much power does it put out? A - 12,000 watts with EFI of usable peak power for a minimum of 30 seconds.

Q - What does it weigh? A - 501 lbs.

Q - Does this have enough juice to run a plasma cutter? A - If your plasma cutter doesn't draw more than 12,000 watts at peak and 10,500 watts continuous, it will power it.

How to Check an Egnine Before Starting:

Check Fuel.
Check fuel level and fill as necessary. Stop fueling once the fuel has reached the neck tube.
Open Service Door.
Open top service door.
Check Oil.
Check oil with the unit on a level surface. Use the full mark on the dipstick as a guide.
Fill Oil.
Fill the oil in the oil fill tube. The unit has a low oil pressure shutdown switch but you should still check the oil.
Check Battery.
Keep the battery in good condition. Store the battery in a warm area.