Hypertherm Powermax 85/105 Nozzle (65-85 A) #220816 (5/pk) or #228760 (25/pk)

Hypertherm Powermax 85/105 Nozzle, 65-85A - 5-Pack #220816 or 25-Pack #228760

The Hypertherm Powermax 85 and Powermax 105 Nozzle #220816 from Welder Supply directs the flow of plasma for precise cutting. When a powered electrode and plasma cutter nozzle touch metal, it creates a spark to heat the gas into plasma. The orifice in the nozzle constricts the arc to a specific diameter. The arc does not actually touch the nozzle. The plasma gas provides a thin boundary layer of cool gas, separating the arc and nozzle.

• If the current level is too high or gas flow too low, the arc may contact the cutting nozzle causing a double arc. This will damage the nozzle, increasing its diameter.
• The nozzle must be checked frequently and, if needed, corrected or you could have a poorly focused arc. This will cause a bad cut finish.
• If a nozzle is gouged or if the hole is out of round, it should be replaced. Piercing or cutting too fast can also damage the nozzle.
• A worn nozzle will cause cut quality to deteriorate. Your Powermax 85 or Powermax 105 plasma cutter is a huge investment. Protect it with the Hypertherm Powermax 85/105 Nozzle 85A Part #220816 from Welder Supply.

These nozzles are a great value, offered in packs of five. Check out the other plasma cutter consumables for the Hypertherm Powermax 85/105 Welders Supply offers.

Compatible Machines

• Powermax45
• Powermax45 XP
• Powermax65
• Powermax85
• Powermax105

Shop other Hypertherm products, Plasma Cutting Machines and Accessories at the best prices online.

Compatible Machines

• Powermax45
• Powermax45 XP
• Powermax65
• Powermax85
• Powermax105

• Hypertherm Powermax 85/105 Nozzle 85A #220816 Spec Sheet
• Hypertherm Torch & Consumable Catalog (2023)

Product Questions and Answers

Have a question about this product? Submit your question using the form below