How much air pressure is needed?

Input pressure/flow requirement is 6.75 cfm at 90 psi minimum, 120 psi maximum.

What is the thickest it can cut?

It can sever up to 1 1/4"., but the cut will be slow and not especially clean?

What size air compressor does this require?

It requires one rated for at least 6.75 scfm at 90 psi.

Ships Free To Lower 48 States

Shop Miller Spectrum 875 Plasma Cutter with XT60 Torch and Ships with Free Helmet and Gloves

Miller Spectrum 875 Plasma Cutter #907583 for sale at Welders Supply

Miller Spectrum 875 Plasma Cutter with XT60 Torch, 20ft Lead #907583 OR 50ft Lead #907583001

Part Numbers: 907583

UPCs: 715959589222

9 Reviews

Choose Torch Lead Length

$4,795.92 Value +$3,859.00

Miller Spectrum 875 Plasma Cutter with X...

Torch Lead Length: 20 FT

Included with your purchase:

Money in your pocket! Free Gift in Checkout!

FREE!

Welders Supply Magnetic Cup Holder

FREE!

Black Stallion Split Cowhide Stick Glove...

Choose Options

FREE!

Welders Supply T-Shirt & Stickers

Small

Medium

Large

1X Large

2X Large

3X Large

Design: American Welder

$3,859.00 + Free Shipping (Reg. $4,795.92)

Save $936.92

$3,859.00 + Free Shipping (Reg. $4,795.92)

Save $936.92

Call 844-682-0205 or CHAT for more options

Features
Specs
Documents
Videos
Accessories
Consumables
Reviews
FAQS

7/8" Cut
Multi-Phase
220V
3-Year Miller Warranty

Miller Spectrum 875 Plasma Cutter with XT60 Torch 20ft #907583 OR 50-ft Cable #907583001

The Miller Spectrum 875 plasma cutter comes with the XT60 handheld torch for cutting up to 7/8in mild steel. Although it weighs only 51lbs, it provides a 15in/minute cut-rate, thanks to its 230/208V (1 phase) power. This unit incorporates state-of-the-art technologies from Miller, such as:

Automatic air regulators that eliminate the need for bulky pressure gauges and automatically change the air pressure for the optimal cutting and gouging
Miller's Ultra-Quick Connect to make the connection between the torch and the work cable simple and fast
Wind Tunnel Technology and Fan-On-Demand innovations prevent particulates from entering and damaging the unit while also ensuring it remains cool by only running the fans when needed
Auto-Refire seamlessly controls the pilot arc to make cutting large and/or multiple pieces of metal a breeze

All these technologies are standard on the Spectrum 875, and you can opt for CNC/Automation cutting capabilities for this model with either long or short torches.

PROCESSES

Plasma (PAC)

Find the best Miller plasma cutter price at Welders Supply.

Shop all our Plasma Cutting Machines, Plasma Cutting Accessories, and Plasma Cutting Consumable Parts online at Welders Supply

Other Versions of the Miller Spectrum 875:

907584001 - Auto-Line XT60 Hand-Held Torch with 20ft/50ft Cable

Spectrum® 875 #907583 Specifications:
Processes	Air Plasma Cutting and Gouging
Plasma Gas	Air or Nitrogen only
Input Voltage Options	208 V 220/230/240 V
Input Hz Range	50 / 60 Hz
Input Phase	1 or 3-phase
Input Current Type	DC
Required Input Pressure / Flow	6.75 cfm (191 L/min.) at 90 psi minimum (621 kPa), 120 psi maximum (828 kPa)
Recommended Generator Power	11000 W
Maximum Open Current Voltage	400 VDC
Cutting Capability	Rated: 7/8 in. (22.2 mm) Sever: 1-1/4 in. (32 mm)
Material Cutting Thickness	Aluminum: 5/8 in. (15.9 mm) at 15 IPM (381 mm/min.) Stainless Steel: 7/8 in. (22.2 mm) at 15 IPM (381 mm/min.) Mild Steel: 7/8 in. (22.2 mm) at 15 IPM (381 mm/min.)
Rated Output at 104 Degrees Fahrenheit	60 A at 140 VDC: 208 V: 40% duty cycle 230 V: 40% duty cycle 230 V: 100% duty cycle at 50 A
Input Amperage Range for Given Voltage Output	208 V: 47 A 230 V: 42 A
Industrial Applications	Auto / Cycle (Racing, Customizing, Restoring) Construction DIY / Home Hobbyist Heavy Equipment Manufacturing Infrastructure Manufacturing Shipbuilding Boat / Yacht High Purity Processing
Net Width	8.75 in (222 mm)
Net Height	13.5 in (343 mm)
Net Length	18.5 in (470 mm)
Net Weight	With hand-held torch 20 ft. (6.1 m): 49 lb. (22.2 kg) With hand-held torch 50 ft. (15.2 m): 58 lb. (26.3 kg)
Portability	Handles Straps
Warranty	3 years - Miller's True Blue Warranty

Manufacturer Reviews

John

Was looking to buy a plasma cutter for some time and finally decided on the Spectrum 875. This unit is probably larger than I'll ever need but when that one job comes along, I'll have the tool to get it done. This machine works very nice and easy to use. It makes short work on cutting any metal I've come across. When using a guide (Strait edge, etc...# this unit cuts very clean with little to no slag at all. When you get the hang of the speed of travel along with the right amount of power the cut is very, very clean. I now use the plasma cutter more than my metal band saw #both horizontal and vertical). Wish I would have purchased one years ago. Thanks for an outstanding piece of equipment.

Richard

Had it for a week. Tested it on a piece of 3/8" Mild steel versus my old (15 years old) Miller spectrum 375. This thing is a beast. It will pierce a hole right through 3/8 in an instant. Slices cleanly through it quickly too. The machine is super quiet and very compact. The fan doesn't activate until needed. My last Miller plasma gave me zero trouble for 15 years before I purchased this new one. I'm confident this unit will be just as reliable.

freyboy65

This plasma cutter does a great job of cutting all types of metals. This product saved me a lot of money that I didn't need to buy as many tanks of gas and oxygen for my torch. I especially like the long leads so I don't need to keep moving the machine if I'm cutting a large project. I owned my machine since february 2012 and it gets used quite a bit in my farm shop.

The Adam

Great machine, not compleatly CNC ready. I have had the machine for almost a year now and have used it on about a dozen projects. The biggest (most cuts) was a fabricated bumper for a pickup. The machine runs well, cuts great, and is altogether impressive. The drag shield does obstruct the view as mentioned, but I usually cut with a guide so I do not find it much of a hindrance. To this point I have done only hand cutting. I bought this machine for the cutting capacity and because it was CNC ready. I am in the process of building the CNC and just found that it does not have arc OK / OK to move signal. The auto line version does, and, had I know that, I would have ordered that instead. In my opinion if automation ready is stated it should have that output, were it not for that I would give it 5 stars. As a FYI the machine does not have a voltage divider, something I think should be more clear in the manual.

rhstampfli

Torch cable & head The torch head is very stiff and is molded in the side position to where you cannot hold it very steady down on the metal when trying to cut a piece with a circular or straight line template. When you are free handing a cut you want a limber cable and torch head. Don't get me wrong the power source is well recommended but the torch assembly has to go.My rating is low due to this part of the package. If it wasn't for this i would have kept the machine.Blue is the color of all our machines except our plasma machine. I hope Miller redesigns the torch assembly.

SPY3143

GREAT MACHINE FOR WHAT IT WAS NEEDED TO DO THIS PLASMA WORKS TO IT SPECKS AND BEYOND IT WORKING SPECKS.....A VERY GREAT MACHINE AND VERY EASY TO USE

Bailey the kid

Very good all around plasma cutter Im in the ninth grade and we have a metals class. Part of the course is to learn how a plasma cutter works and how to use it correctly. This was by far one of the easiest machines in our shop to work with. Before I knew how to operate it, I immediately knew what the controls were and what they did. When it comes to cutting performance I would recommend this machine over any other I have gotten to test. It cuts through 1/2 inch stock like butter and can cut mesh a lot safer nd faster than a grinder. Great machine.

BigRye01

Simple to set up and use. This machine has awesome power for the size of the machine. Controls are easy to use and cutting is fast and easy. I have pushed the machine to its severance cut yet, but I am very impressed with what I have had opportunity to sue it for. I would definetely reccommend this product.

Sideswiped

Excellent product. I bought this to cut I-beams off of semi trailers that get refurbished.what was taking me 6 hrs with a cutting torch is taking me 30min with the 875c plasma cutter.im cutting 3/4 in plate and 1/2in I-beam with ease.