True Multi-Process –Excellent performance on MIG, TIG and STICK.
Unmatched Portability –weighing in at 24 kg (53 lbs) and dual voltage capability and 4 handle roll cage. Detach the Rebel 235ic from its cart and tackle any job around the shop or out at the job site.
Power to Perform –have the confidence with Rebel 235ic to run the full range of 0.9 mm (.035 in.) wire –short arc and spray transfer. Also up to 1.2 mm (.045 in.) solid wire and up to 1.4 mm (.052 in.) cored wire. Plus, rods up to 4.0 mm (5/32 in.) and TIG rods up to 5.0 mm (3/16 in.)
sMIG Technology -Innovative “smart-Mig” feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc. Set wire diameter and plate thickness and you are ready to weld.
Industries
Agricultural Equipment
General Cast Iron Repair and Fabrication
HVAC
Repair and Maintenance
Welding Process
GMAW (MIG/MAG - Metal Inert Gas / Metal Active Gas)
"Worth every penny! Build qualty is second to none. The EMP 235ic is proving to be a solid choice for our fab shop. What a feature rich machine leaps and bounds above the competition. Burned through 40lbs. Of solid wire 0.35 in spray transfer and 15lbs. Of rod between 6010 and 7018 flawlessly with out a hiccup with in the first week. The only thing I've been asking myself is why didn't we buy it sooner. Highly recommend and impressed!" - Review originally posted on cyberweld.com
Product Questions and Answers
Q - With a 220v connection, how many household amps are needed for this machine?A - If you're running on 230v it would require a 50 amp breaker
Q - Can this be powered by a generator?A - Yes, you would need one that provides at minimum a continuous 9000w.
How to insert or replace wire:
Spool side door.
Open the spool side door.
Release pressure roller arm.
Release the pressure roller arm by levering the tension screw toward you.
Pressure roller arm.
Lift the pressure roller arm up.
Pass the electrode wire through the inlet guide.
With the MIG welding wire feeding from the bottom of the spool, pass the electrode through the inlet guide, between the rollers, through the outlet guide, and into the MIG torch.
Re-secure pressure roller arm.
Re-secure the pressure roller arm and wire drive tension screw and adjust the pressure if necessary.
Straight feed wire through MIG torch.
With the MIG torch lead reasonably straight, feed the wire through the MIG torch by depressing the trigger switch.
Close spool side door.
Close the spool side door.
Have a question about this product? Submit your question using the form below