Try these accessories with your new Miller SPECTRUM 625 X-TREME
Big cutting power in a small package - the industry's most portable and powerful 40-amp plasma cutter offers 5/8 in. mild steel cutting. The unit offers easy connection to 120V or 240V input with Auto-Line technology and MVP Adapters.
Rated Cutting Capacity
This is rating should meet or exceed your typical cutting thickness. The rated cutting capacity is based on traveling approximately 13 inches per minute to achieve a steady, precise cut.
Auto-Line™ and MVP™ (multi-voltage plug) Adapters
The Auto-Line circuitry automatically connects to 120–240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. This provides state-of-the-art flexibility for the operator. Miller’s multi-voltage plug (MVP™) Adapters allow connection to 120 or 240 V receptacles without tools—choose the adapter that fits the receptacle and connect it to the power cord.
Protective X-CASE™
Miller's X-CASE provides convenient and effective protection during transport and storage. Additional space is ideal for MVP Plug Adapters, consumable box, as well as gloves, eye protection, etc. Keep your equipment organized and your work environment efficient.
XT40 Torch
The XT40 Torch features an ergonomic handle with an optimized no-slip grip, thumb guide, and finger contours to help prevent operator fatigue and ensure consistent quality.
Auto-Refire™
Auto-Refire™ Technology provides another degree of operator convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal.
Portability
At just 21 pounds, the shoulder strap allows the operator to easily move from location to location around a job site.
Automatic Air Regulation
The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting and gouging performance.
Automatic Consumable Detection
Automatically detects consumable type installed and adjusts gas pressure to optimize performance eliminating the need for manual air regulation.
I have a small shop. I know miller products are the best and was not disappointed. The plasma cutter 625 is amazing and cuts everything with ease. I am glad to own such a fine product from a great company.
gtsuper
assume machine
I run this off my Bobcat 225 or my shop 220v. Cuts great and the weight/size of it is much smaller than my older Hypertherm. Haven't tried the 120 yet but I'm sure it's fine.
Scott
The Good and the Bad ...
Machine works great,, but the plastic connection from Torch to machine broke right away. About to turn machine in for warranty repair.
Rick
I would recommend this product
Use this product around the house and at the ranch. Light weight and easy to operate , runs great on my 26 gallon compressor,very easy to set up and makes great clean cuts. Used it to rebuild the tongue on a trailer that I bent , metal was 025" rectangular tubing , this plasma cutter made smooth straight cuts with very little clean up making job go much faster. Great machine.
DLRude
Really good cutter, bad bad storage box
Would have been 5 stars if the box was useful. I love the cutter. It is powerful, small, can plug it in anywhere. I hardly ever use it. I have owned it for 2 years and avoid using it. I try to use a die grinder with carbide burr instead, or a body saw, or a band saw or saws all. If you are wondering why its because of the black storage box. The black plastic storage box is awful. I used it today. The cutter does a great job. Used it to cut out a small .5" x 1" rectangle is 1/8" hot rolled plate. It took just a minute or so to make the cut. Afterwards I screw around for 20 minutes trying to get the cutter and cords back into the box. That's why I avoid using it. Too much screwing around to put it away. Whoever designed the box designed it to put factory wrapped cords and hoses in for shipping rather than for a real workman to use. It needs a box intended for shop use. I also have a Maxstar 150 STH. Owned it for about 2 years. Same story but worse, has even more stuff to get back in the same size box. I have used it one time only. I use my Dynasty 200DX instead and bring the work to it. I purchased portable tools for use as portables not to sit on a cart. The Spectrum 625 and Maxstar 150 defeat that portability because of the poor box design.
Robert
10/10 recommend!
I was originally going to purchase the 375, but it wasn't available. Ordered the 625 and I'm actually glad I did. This thing goes through metal like something from kill bill! While I don't have a ton of experience with plasma cutters, to say I'm impressed with this machine is an understatement!
Product Questions and Answers
Q - Will this work with engine-driven welders?A - Yes, there is no compromise in cutting capability when it's powered by an engine-driven welder/generator with a 240V receptacle of 4kW or greater.
Q - What CFM rating is required from the compressor to power this unit?A - User manual says 6 SCFM minimum 90 psi max 120
Q - Does this come with an inline moisture filter for the air line?A - You have to order it as an extra.
Q - How long is the power cord, and what MVP adaptors does this come with?A - The cord is 12 ft. MVP adaptors included are 240 V, 50A (6-50P) plug and 120 V, 15 A (5-15P) plug
Have a question about this product? Submit your question using the form below
Documents
Videos
120V
240V
Single Phase
Lightweight and Portable
Torch Included
3-Year Warranty
Big cutting power in a small package - the industry's most portable and powerful 40-amp plasma cutter offers 5/8 in. mild steel cutting. The unit offers easy connection to 120V or 240V input with Auto-Line technology and MVP Adapters.
View all 
