Free Shipping
Over $300
Lightweight and Portable
Voltage Divider with Remote
25' Leads
CSA Hand System with CPC Port
Hypertherm Trade-In System
The Hypertherm Powermax 65 is designed for heavy-duty cutting and gouging. With a 25-foot hand torch and 180° mechanized torch, this plasma cutter offers the versatility for a wide range of jobs.
Stock up on consumables with the Powermax 65 handheld consumable kit or Powermax 65 mechanized consumables kit, or just order what you need:
Customize or upgrade your Powermax 65 with our compatible Hypertherm accessories:
View all Hypertherm Plasma Cutter Torches
Smart Sense ™ technology automatically adjusts the gas pressure when hand welding. This pressure can be manually adjusted for specialized work. SpringStart ™ technology makes starting extra reliable.
Hypertherm machine torches can be hooked up with a variety of automated solutions for mass production. Automated welding can cut, pierce, and gouge just like the hand torches. The Powermax 65 is also compatible with semi-automated systems thanks to a remote operating capability. Each torch can be easily attached to your system with universal mounting brackets.
CNC (computer numerical control) and THC (torch height controller) machines can communicate with the Powermax 65 power source for fully automated work. Follow all operating guides for recommended height, power, and speed adjustments.
Warranty information for Hypertherm products
Register your Hypertherm product on the Hypertherm website
Additional Powertherm 65 errors and fault codes
|
Hypertherm Powermax 65 General Specifications | |
|---|---|
|
Input Voltages |
|
|
Input Current @ 9kW |
|
|
Output Current |
|
|
Rated Output Voltage |
|
|
Duty Cycle |
|
|
Open Circuit Voltage |
|
|
Gas Supply |
|
|
Recommended Gas Inlet Flow Rate / Pressure |
|
|
Input Power Cable Length |
|
|
Power Supply Type |
|
|
Cut Capacity |
|
Engine-Driven Generator Operation | |
|---|---|
| Engine drive rating: 15 kW | System output current: 65 A - Performance (arc stretch): Full |
| Engine drive rating: 12 kW |
System output current: 65 A - Performance (arc stretch): Limited |
| Engine drive rating: 8 kW |
System output current: 40 A - Performance (arc stretch): Limited |
Production Cut Speeds (Current: 65 amps) | |
|---|---|
Mild Steel |
10 GA (3mm) - 224 ipm (6100 mm/min) 1/4" (6 mm) - 116 ipm (3240 mm/min) 3/8" (10 mm) - 62 ipm (1500 mm/min) 1/2" (12mm) - 40 ipm (1140 mm/min) 5/8" (16 mm) - 26 ipm (650 mm/min) |
Stainless Steel |
10 GA (3 mm) - 296 ipm (8260 mm/min) 1/4" (6 mm) - 96 ipm (2850 mm/min) 3/8" (10 mm) - 52 ipm (1250 mm/min) 1/2" (12 mm) - 32 ipm (920 mm/min) |
Aluminum |
1/8" (3 mm) - 336 ipm (8800 mm/min) 1/4" (6 mm) - 152 ipm (4400 mm/min) 3/8" (10 mm) - 68 ipm (1650 mm/min) 1/2" (12 mm) - 48 ipm (1330 mm/min) |
Because the Powermax is compatible with a wide variety of cutting tables, track burners, pipe bevelers, and so on, please refer to manufacturer's instructions.
Use a square to align the torch at right angles to the workpiece in two dimensions.
The torch may travel more smoothly if you clean, check and tune the cutting table's rails and drive system.
Contact with the workpiece can damage the shield and nozzle and affect the cut surface.
Documents
Videos
