Multi-Process
Single Phase
110V or 220V
Torch Included
Consumables Included
3-Year Warranty
Miller Syncrowave 210 TIG/MIG Spoolmate 150 Package #951684
The Miller Syncrowave 210 #951684 is an affordably priced and incredibly versatile TIG welding machine suitable for both personal use and light industrial applications. An easy-to-use interface makes it great for hobbyists and tech schools, but this isn’t an underpowered “learners” machine. There’s plenty of power and versatility for advanced users and the front panel memory card data port makes it easy to upgrade software and expand its capabilities.
Multiprocess Capability
Many multiprocess units don't have the ability to TIG weld aluminum. The Syncrowave 210 has AC TIG capability, and with the included Spoolmate 150 accessory you can MIG weld to fill gaps or boost your travel speed. Additionally, the 5 Amp TIG capability lets you weld thinner materials than other comparably sized welding machines.
Multi-Voltage Plug Lets You Connect to 120 or 240 V Power
With Miller's Auto-Line technology and Multi-Voltage Plug (MVO), you can connect this machine to common 120 or 240 V outlets without any special tools. Just choose the plug that fits the receptacle and plug it in.
Pro-Set Takes the Guesswork Out of Setting Up for TIG Welding
Miller's Pro-Set feature makes it easy and quick to set up weld parameters for TIG welding. The AC Balance provides adjustable oxide removal for high-quality aluminum welds, and the Pulse Capability adjusts pulses from 0 to 150 pulses per second for increased puddle agitation, arc stability, and travel speeds while reducing heat input and distortion.
Fan-on-Demand Extends Service Life
Miller's Fan-on-Demand feature reduces the amount of contaminants pulled through the machine to help it last longer. The fan only runs when needed, up to 36% less than units with continuous running fans.
Built-in Running Gear
There's no need to buy a cart to transport the Syncrowave 210. An EZ-Change low cylinder rack and built-in storage space help you keep your accessories organized and make transport easy.
What's Included:
- Syncrowave® 210
- 10 ft. (3 m) primary cord with MVP™ plugs for 120 V (219261) and 240 V (219258)
- 12 ft. (3.8 m) Weldcraft™ A-150 TIG torch with Dinse style connector
- 12 ft. (3.8 m) work cable with clamp and Dinse style connector
- 12 ft. (3.8 m) stick electrode holder with Dinse style connector
- RFCS-14 HD remote foot control
- Regulator/flow gauge and gas hose
- Quick Reference Guide
- 4-Pin to 14-pin connector
- Spoolmate™ 150 Series spool gun (#301 272)
Highlights
-
5 Amp TIG Capability:
Allows users to weld thinner materials than other machines in this category
-
Pro-Set™ Feature:
Eliminates the guesswork when setting weld parameters
-
Auto-Set™:
Breakthrough control that automatically sets your welder to the proper parameters
-
6010 Stick Electrode Capability:
Increase the DIG setting for stiffer, more penetrating electrodes like E6010
-
Low Power Draw:
Inverter-based power source provides full welding output from 240 V while drawing less than 30 amps
-
Easy-to-Use:
Turn on, select process, set amperage, and weld!
-
Use it on 120 AND 240 Volt Input Power:
Allows you to connect to common 120 or 240 V power receptacles without the use of any tools
-
Built-in Running Gear:
Gives you maximum portability with an EZ-Change™ low cylinder rack and built-in storage space
-
Fan-on-Demand™:
Allows the fan to run up to 36% less to reduce the amount of contaminants pulled though the machine
-
14-Pin Controlled Operator Alternatives:
choose a foot control, fingertip control, or wireless foot control
Rebate Redemption
How To Submit Your Build with Blue™ Rebate Request
- Purchase a qualifying product.
- Get an electronic copy of your invoice or receipt showing the purchase of at least one of the eligible products shown below.
- Locate the serial number of each product.
- For the Additional Products rebate, circle each additional item and price paid on your invoice or receipt.
- Submit your rebate request.
30-Day Submission Deadline
Rebate claims must be submitted within 30 days of purchase date.
Submit or track rebate
Product Questions and Answers
Q - Does this self feed the wire?
A - No, all wire must be fed through the spoolgun.
Q - What size breaker do I need to run it on 110V?
A - It would require a 20 amp breaker.
Q - Can you MIG weld with a torch or do you have to use the spoolgun?
A - You can only MIG weld using the spoolgun.
Q - Is this air cooled?
A - Yes, air cooled.
How to stick weld:
- Clean workpiece.
Make sure workpiece is clena before welding.
- Prepare to weld.
Place as close to the weld as possible.
- Insert electrode.
Before striking an arc, insert an electrode in the electrode holder. A small diameter electrode requires less curretn than a large one. Follow manufacturer recommendations.
- Arc length.
Arc length is the distance from the electrode to the workpiece. Correct arc length is related to electrode diameter. Examine the weld bead to determine if the arc length is correct.
- Remove slag.
Use a chipping hammer nad wire brush to remove slag. Remove slag and check weld bead before making another weld pass.
Have a question about this product? Submit your question using the form below
Documents
Videos
