Multimatic® 235 with EZ Latch Cart and TIG Kit #951847
Built for professionals in the manufacturing/fabrication, MRO and construction fabrication and education segments, the Multimatic 235 allows welders of all skill levels to be more efficient for all their MIG, flux-cored, stick and DC TIG welding needs. Setup is quick and easy, letting operators have faster uptime and weld with confidence.
What's Included:
Power source with 10 ft. (3 m) industrial power cord
15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/Bernard® AccuLock™ MDX consumables for .030/.035 in. (0.8/0.9 mm) wire
10 ft. (3 m) cable w/electrode holder & 50 mm Dinse-style connector
10 ft. (3 m) work cable w/clamp & 50 mm Dinse-style connector
2 Flow gauge regulator and gas hose for argon or AR/CO2 mix
.030/.035 in. (0.8/0.9 mm) reversible drive rolls
Extra contact tips
Material thickness gauge
EZ-Latch™ dual cylinder running gear with elevated gun and cable rack
Multimatic 235/255 TIG kit
Two chains to secure gas cylinders
Features:
Versatility: Multiprocess Capabilities of MIG, Stick, DC Lift Arc TIG and DC Pulsed TIG
Easy-to-understand interface: 4.3-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time
Auto-Set™ Elite: Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Portability - Machine only weighs 63 lb: Weight is reduced by more than 50 percent compared to transformer welding machines
TIG Kit: Kits come complete with everything needed to TIG weld with the Multimatic 235. Includes 25-foot (7.6 m) Weldcraft™ A-150 TIG torch, RFCS-14 HD foot control, 10-pin to 14-pin adapter cord, flow gauge regulator with 5-foot (1.5 m) gas hose, and AK3C torch accessory kit.
EZ-Latch™ Dual Cylinder Rack with Elevated Gun and Cable Rack: Quickly disconnects from the machine and enables portability. Dual cylinder rack and storage compartment. Allows operator to easily store two gas cylinders. Includes elevated gun and cable rack to keep cables off the floor and tangle-free.
MDX-250 MIG Gun w/ AccuLock™ MDX consumables: AccuLock liner loads from the front and locks at the front and back to ensure proper alignment for flawless wire feed path. New rubber overmold and ball-and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock™ MDX contact tips provide superior arc performance.
Check out the wide selection of MIG, TIG, Stick and Gas Miller welders available at Welders Supply Company.
Highlights
Versatility:
Multiprocess Capabilities of MIG, Stick, DC Lift Arc TIG and DC Pulsed TIG
Easy-to-understand interface:
4.3-inch color LCD display ensures proper machine setup and parameter selection
Auto-Set™ Elite:
Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels
Portability - Machine only weighs 63 lb:
Weight is reduced by more than 50 percent compared to transformer welding machines
TIG Kit:
Kits comes complete with everything needed to TIG weld with the Multimatic 235.
EZ-Latch™ Dual Cylinder Rack with Elevated Gun and Cable Rack:
Quickly disconnects from the machine and enables portability
Gun-On-Demand™:
Millers Gun-On-Demand™ allows operators to simply pull the trigger on MIG gun or Spoolgun
MDX-250 MIG Gun w/ AccuLock™:
AccuLock liner loads from the front and locks at the front and back to insure proper alignment
Generator Compatible:
The Multimatic 235 will be able to operate and provide full output when powered by generators
easy to set up and not complicated to use. too bad this unit couldn't have ac tig feature.
Manufacturer Reviews
Big Joe
I use this welder in a small fabrication shop. I have been using a Millermatic 211 and upgraded to this one. I really like the digital readout and how easy it is to tweak the settings for what I'm doing. I never weld the same material very long so it makes that really nice to switch so many times. The 15' gun is a lifesaver. I will never buy another welder with a 10' gun. So easy to switch between different process it eliminates the need for different machines. It is definitely a good size welder but at the same time I can tear in down and take it in the field in 5 minutes. Would definitely buy again.
Product Questions and Answers
Have a question about this product? Submit your question using the form below
People who bought this product were also interested in:
5 Distribution Centers, 391 Reviews
Documents
Videos
TIG Welding
MIG Welding
Stick Welding
Single Phase
220V
3-Year Miller Warranty
